Custom Practice | AUDrive - Best drive test practice tool in Australia

Register Now

Driving Test Routes

Custom Practice

map.search

All
Stop
Roundabout
Pedestrian
Arterial Road
Court
Give Way
Bike Lane
Highrisk
Change Lane
Right Turn
Left Turn
Double Giveway
School Zone 40
School Zone 60
U Turn
Hook Turn
Speed-50
Speed-10
Speed-60
Speed-70
Speed-40
Speed-80

Loading...

Stop

To Office
Pre-Check

Route

Directions

Apple Maps Google Maps

6000 m

Murray St We

Then

Checklist (click)

Head Checks

Mirror Checks

Mirror Checks

Route Navigation

To Office

Select way to navigate

Apple Maps Popular
Google Maps

Practice at real office

Pre-check items

Before the test, a car pre-check would normally be performed by the instructor.

1. Put your low beam on
2. Put your high beam on
3. Turn off high beam
4. Turn on the left / right signal, hazard light (keep them on, turn it off)
5. Put your washers and wipers
6. Beep the horn
7. Show me where your handbreake is
8. Show me where your front and rear demister are
9. Are you comfortable with seat and mirrors?
10. You can start the car if it's not on. When safe, drive to the exit on the left.

Vehicle functions may vary by car model

3-Point Turn

Check List

If electing to commence by pulling over to the left kerb, positions the car parallel to and within 300 mm of the left kerb.
Moves across the road to the right kerb or into a driveway without hitting any kerb hard enough to cause discomfort to vehicle occupants and without allowing any wheel to mount a kerb.
If electing to use a driveway, does not allow the vehicle to enter private property.
Reverses away from the kerb or out of the driveway without hitting any kerb hard enough to cause discomfort to vehicle occupants and without allowing any wheel to mount a kerb.
Returns to the correct side of the road when driving off as the manoeuvre is completed.
Completes the manoeuvre in no more than 2 minutes and without moving across the road to the right more than once.

Source: New Zealand Transport Agency

Reverse Park

Check List

Completes the reverse park in no more than 4 vehicle movements and in no more than 2 minutes (unless traffic conditions make this unreasonable).
Does not reverse more than 7 metres behind the rear of the vehicle in front (measured from the rear of the parked vehicle to the front of the applicant's car)
Finishes with the front and rear left wheels within 300 mm of the kerb.
Finishes with the front of the car between 1 and 2 metres behind the rear of the vehicle in front.
Does not hit the kerb heavily enough to cause discomfort to vehicle occupants.
Does not allow any wheel to mount the kerb while parking.

Source: New Zealand Transport Agency